Kia Soul: Transmitter precautions - Remote keyless entry - Features of your vehicleKia Soul: Transmitter precautions

Kia Soul 2009-2013 AM Owner's Manual / Features of your vehicle / Remote keyless entry / Transmitter precautions

• The transmitter will not work if any of the following occurs:

- The ignition key is in the ignition switch.
- You exceed the operating distance limit (about 90 feet [30 m]).
- The battery in the transmitter is weak.
- Other vehicles or objects may be blocking the signal.
- The weather is extremely cold.
- The transmitter is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter.

When the transmitter does not work properly, open and close the door with the ignition key. If you have a problem with the transmitter, contact an authorized Kia dealer.

• If the transmitter is in close proximity to your cell phone or smart phone, the signal from the transmitter could be blocked by normal operation of your cell phone or smart phone. This is especially important when the phone is active such as making call, receiving calls, text messaging, and/or sending/ receiving emails. Avoid placing the transmitter and your cell phone or smart phone in the same pants or jacket pocket and maintain adequate distance between the two devices.

    Remote keyless entry system operations
    Lock (1) 1.Close all doors, engine hood and tailgate. 2.Press the lock button(1). 3.All doors and tailgate will lock. The hazard warning lights will blink once. 4.If the lock button is pressed o ...

    This device complies with Part 15 of the FCC rules
    Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may c ...

    See also:

    Special Service Tools
    Tool Name / Number Illustration Description RKE Battery Checker 09954-2P100 Measuring the RKE battery voltage ...

    Curtain Airbag (CAB) Module. Components
    ...

    Wheel. Hub nut tightening sequence
    Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...