Kia Soul: Heated Oxygen Sensor (HO2S). Specifications
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
| Item |
Specification |
| Heater Resistance (Ω) |
2.4 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
| A/F Ratio (λ) |
Output Voltage(V) |
| RICH |
0.6 ~ 1.0 |
| LEAN |
0 ~ 0.4 |
| Item |
Specification |
| Heater Resistance (Ω) |
Approx. 9.0 [21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies ...
Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform
...
See also:
Interior light
Do not use the interior lights for extended periods when the engine is not running.
It may cause battery discharge.
WARNING - Interior light
Do not use the interior lights when driving in the dark. ...
Emergency Fastening Device (EFD). Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
High mounted stop light replacement
1. Open the tailgate.
2. Remove the cover.
3. Disconnect the connector by pressing the clip (1).
Bulb type
4. Pull out the module from the high mounted stop light assembly by pulling both
...