Kia Soul: Valve Body. Component Location - Hydraulic System - Automatic Transaxle SystemKia Soul: Valve Body. Component Location

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body. Component Location

1. Automatic transaxle
2. Valve body assembly

1. Pressure Control Valve(PCV) adjust screw
2. Solenoid valve bracket
3. Oil temperature sensor
4. Line Pressure Control Solenoid Valve
5. SS-A Solenoid Valve(ON/OFF)
6. SS-B Solenoid Valve(ON/OFF)
7. Overdrive Clutch Control Solenoid Valve(OD/C)
 8. Underdrive Brake Control Solenoid Valve(UD/B)
9. 26 Brake Control Solenoid Valve(26/B)
10. 35R Clutch Control Solenoid Valve(35R/C)
11. Torque Converter Control Solenoid Valve (T/CON)
12. LR/B pressure fiow hole
13. UD/B pressure fiow hole
14. Accumulator

Valve Body Flow

1. To cooler
2. From cooler
3. Lubrication(rear)
4. OD Clutch pressure
5. Reducing pressure (red2)
6. Reducing pressure (red1)
7. Damper release pressure
8. Damper apply pressure
 9. Lubrication(front)
10. 35R Clutch pressure
11. 26 Brake pressure
12. From oil pump
13. To oil pump
14. Underdrive(UD) Brake pressure
15. Low & reverse pressure

    Fluid. Replacement
       ATF of the 6-speed automatic transaxle does not need to be replaced for Normal Usage. If the vehicle is used for any of ...

    Valve Body. Description
    The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regula ...

    See also:

    How does the air bag system operate
    Air bags are activated (able to inflate if necessary) only when the ignition switch is turned to the ON or START position. The appropriate air bags inflate instantly in the event of a serious ...

    Driving your vehicle
    Be sure the exhaust system does not leak. The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the ex ...

    Antenna Installation
    1. Connect the roof antenna connectors. 2. Install the rear roof trim. 3. Connect the negative (-) battery term ...