Kia Soul: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the solenoid valve connector (A).
|
| 3. |
Measure resistance between solenoid valve signal terminal and
ground terminal.
|
| 4. |
Check that the resistance is within the specification.
|
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
See also:
Condition and operation in the front passenger occupant detection system
*1) The system judges a person of adult size as an adult. When a smaller adult
sits in the front passenger seat, the system may recognize him/her as a child depending
on his/her physique and pos ...
Condition of ISG system operation
The ISG system will operate under the following condition:
- The driver’s seat belt is fastened.
- The driver’s door and engine hood are closed.
- The brake vaccum pressure is adequate.
- The ...
Rear window wiper and washer switch
The rear window wiper switch is located at the end of the wiper and washer switch
lever. Turn the switch to the desired position to operate the rear wiper and washer.
ON - Normal wiper operation
...