Kia Soul: Transaxle Oil Temperature Sensor. Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Transaxle Oil Temperature Sensor. Removal

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor. Removal

1.
Change the shift lever to "N" range.
2.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
3.
Disconnect the input & output speed sensor connector (A).
4.
Loosen the main connctor bolt (B).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

5.
Dissconnect the solenoid valve connector (A).
6.
Remove the solenoid valve connector clip (B) after loosening a bolt and then remove the connector by pushing down to it.
    Transaxle Oil Temperature Sensor. Inspection
    1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector (A). 3. Measure resistance bet ...

    Transaxle Oil Temperature Sensor. Installation
    1. Install in the reverse order of removal.    • ...

    See also:

    Front Impact Sensor (FIS). Components
    ...

    Front Glass Installation
       • In order to mount the front glass, use the tools shown in the following figure: ...

    Vehicle break-in process
    No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the ...