Kia Soul: Tightening Torques - Manual Transaxle SystemKia Soul: Tightening Torques

Kia Soul 2014-2019 PS Service Manual / Manual Transaxle System / Tightening Torques

Items
 Quantity
 N.m
 kgf.m
 lb-ft
Oil drain plug

58.9 ~ 78.5
 6.0 ~ 8.0
 43.4 ~ 57.8
Oil filler plug

58.9 ~ 78.5
 6.0 ~ 8.0
 43.4 ~ 57.8
Shift lever assembly mounting bolt
 4EA
 8.8 ~ 13.7
 0.9 ~ 1.4
 6.5 ~ 10.1
Control cable retainer mounting nut
 2EA
 11.8 ~ 14.7
 1.2 ~ 1.5
 8.7 ~ 10.8
Neutral switch
39.2 ~ 58.8
 4.0 ~ 6.0
 28.9 ~ 43.4
Back up lamp switch
39.2 ~ 58.8
 4.0 ~ 6.0
 28.9 ~ 43.4
Speed sensor mounting bolt
 1EA
 4.9 ~ 6.9
0.5 ~ 0.7
 3.6 ~ 5.1
Control shaft assembly mounting bolt
 5EA
 19.6 ~ 26.5
 2.0 ~ 2.7
 14.5 ~ 19.5
Control cable bracket mounting bolt
 3EA
 14.7 ~ 21.6
 1.5 ~ 2.2
 10.8 ~ 15.9
Transaxle support bracket mounting bolt
 3EA
 58.9 ~ 78.5
 6.0 ~ 8.0
 43.4 ~ 57.8
Transaxle mounting bracket bolt
 2EA
 88.3 ~ 107.9
 9.0 ~ 11.0
 65.1 ~ 79.6
Roll rod bracket mounting bolt
 2EA
 49.0 ~ 63.7
 5.0 ~ 6.5
 36.2 ~ 47.0
1EA
 107.9 ~ 127.5
 11.0 ~ 13.0
 79.6 ~ 94.1
Starter mounting bolt
2EA
 49.0 ~ 63.7
 5.0 ~ 6.5
 36.2 ~ 47.0
Transaxle upper mounting bolt (TM=>ENG)
 2EA
 42.2 ~ 53.9
 4.3 ~ 5.5
 31.1 ~ 39.8
Transaxle lower mounting bolt (ENG=>TM)
 4EA
 42.2 ~ 48.1
 4.3 ~ 4.9
 31.1 ~ 35.4
1EA
 42.2 ~ 53.9
 4.3 ~ 5.5
 31.1 ~ 39.8

    Specifications
    Transaxle type M6CF1 Engine type Gasoline 1.6 GDI Gear ratio 1st 3.615 2nd 1.955 3rd 1.286 ...

    Lubricants
    Items Specified lubricant Quantity Transaxle gear oil SAE 75W/85, API GL-4 1.8 ~ 1.9 L (0.46 ~ 0.50 U.S.gal., 1.90 ~ 2.0 U.S. qt., 1.58 ~ 1.67 lmp ...

    See also:

    Flywheel Removal and installation
    1. Remove the manual tranaxle. (Refer to Manual Transaxle System - "Manual Transaxle ") 2. Remove the flywheel (A). ...

    User Settings Mode
    Description On this mode, you can change setting of the doors, lamps, and so on. Door Auto Door Lock (if equipped) • Off: The auto door lock operation will be deactivated. & ...

    Brake Line. Removal
    1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder rese ...