Kia Soul: Side Impact Sensor (SIS). Description
Side Impact Sensor (SIS) system consists of two P-SIS which are installed
at each center of the front door module (LH and RH) and two SIS which are installed
at each center pillar nearby (LH and RH).
Side Pressure Sensor is also called P-SIS because it detects pressure
due to collision at its mounting location.
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM decides deployment of the airbag and the time of deployment through
the collision signal of the SIS when the collision occurred.
Front Impact Sensor (FIS). Installation
•
Do not turn the ignition switch ON and do not connect
the battery cable while replac ...
See also:
SS-B Solenoid Valve(ON/OFF). Specifications
ON/OFF Solenoid Valve(SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
Internal resistance(Ω)
...
TJ Joint Inspection
1.
Check the spider assembly for roller rotation, wear or corrosion.
2.
Check the groove inside the joint case for wear or corrosion
...
To keep locks from freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine
into the key opening. If a lock is covered with ice, squirt it with an approved
de-icing fluid to remove the ice. If ...