Kia Soul: Seat Heater (Non-Air Ventilation) Inspection - Seat Electrical - Body Electrical SystemKia Soul: Seat Heater (Non-Air Ventilation) Inspection

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Seat Electrical / Seat Heater (Non-Air Ventilation) Inspection

First Row Seat
1.
Check for continuity and measure the resistance between terminals.

 
Connector
Resistanc
(± 10%)
Cushion (C)
1-2
4.54 Ω
Back (B)
1-2
5.16 Ω
Set (A)
1-4
9.70 Ω

Second Row Seat
1.
Check for continuity and measure the resistance between terminals.
[LH]

[RH]

 
Connector
Resistanc
(± 10%)
Cushion (A)
1-4
4.13 Ω

  
Performance of heater is the average temperature of seat surface.
The temperature of seat surface according to pushing the seat heater switch is as below.
 
Type
1st
2nd
3rd
First row seat
Cushion
(±2°C/±35.6°F)
HI-Low
38°C
(100°F)
42°C
(107.6°F)
-
3 Step
36°C
(96.8°F)
39°C
(102.2°F)
42°C
(107.6°F)
Back
(±2°C/±35.6°F)
HI-Low
45°C
(113°F)
50°C
(122°F)
-
3 Step
40°C
(104°F)
45°C
(113°F)
50°C
(122°F)
Second row seat
Cushion
(±2°C/±35.6°F)
HI-Low
38°C
(100.4°F)
42°C
(107.6°F)
-

    Seat Heater (Non-Air Ventilation) Circuit Diagram
    [First Row Seat] [Second Row Seat] ...

    See also:

    SS-A Solenoid Valve(ON/OFF). Description
    SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...

    Intake Actuator Description
    The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fr ...

    Accelerator Position Sensor (APS). Schematic Diagrams
    Circuit Diagram (M/T) (A/T) ...