Kia Soul: Sealant
| Items |
Specified sealant |
| Control shaft assembly |
LOCTITE 5060 or Anaerobic adhesives type J (For
flange) |
Lubricants
Items
Specified lubricant
Quantity
Transaxle gear oil
SAE 75W/85,
API GL-4
1.8 ~ 1.9 L
(0.46 ~ 0.50 U.S.gal., 1.90 ~ 2.0 U.S. qt., 1.58 ~ 1.67 lmp ...
Special Service Tools
Tool Name / Number
Illustration
Description
Engine support fixture (bar)
09200-3N000
Used for holding engine assembly when removing
/ in ...
See also:
Distributing the sealant
11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly
distribute the sealant in the tire.
Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...
Cylinder Head Inspection
Cylinder Head
1.
Inspect for flatness.
Using a precision straight edge and filler gauge, measure the
surface the contacting the cylinder block and the ...
Yaw-rate and G Sensor. Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...