| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the trunk trim.
|
(1) |
Remove the shelf covering (A).
|
|
(2) |
Remove the luggage cover board (A).
|
|
(3) |
Remove the luggage box (A).
|
|
|
2. |
Using a clip remover, detach the rear transverse trim mounting
clips (A).
|
|
3. |
Using a screwdriver or remover, remove the rear transverse trim
(B).
|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
1. Rear transverse trim
...
See also:
Crankshaft Position Sensor (CKPS). Repair procedures
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification:
Refer to “Waveform”
Removal
...
Transaxle Control Module (TCM). Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The
module receives and processes signals from various sensors and implements a
wide range of transaxle controls to ensu ...
Replacement
1.
Uplift the vehicle with lift.
2.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
...
Kia Soul: Rear Transverse Trim Replacement
Rear Transverse Trim Component Location
Luggage Side Trim Component Location