Kia Soul: Rear Disc Brake. Components
| 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier |
4. Caliper body 5. Brake pad 6. Pad retainer |
Front Disc Brake. Installation
Brake caliper assembly
1.
Install in the reverse order of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000). ...
Rear Disc Brake. Removal
Brake caliper assembly
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...
See also:
Manual transaxle oil Replacement
1.
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Drain the manual tra ...
Front Hub / Knuckle Disassembly
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
In case of an emergency while driving
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you h ...