Kia Soul: Power Door Lock Switch Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
3. |
Remove the power window switch assembly (A) loosening the
mounting screws (8EA).
|
4. |
Remove the power window switch (A) after loosening the mounting
screws (4EA).
|
Power Door Lock Switch Diagnosis With GDS
1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to ...Power Door Lock Switch Installation
1. Install the power window switch assembly. 2. Install the front door trim after connect the connector. ...See also:
Scheduled maintenance service
Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow the Maintenance Under Severe ...
Intake Air Temperature Sensor (IATS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between th ...
Front Strut Assembly Disassembly
1.
Using the special tool (09546-26000), compress the coil spring
(A).
Tightening torque:
58.8 ~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6l ...