Kia Soul: Output Speed Sensor. Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor. Removal
| 1. |
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
| 2. |
Disconnect the input & output speed sensor connector(A).
|
| 3. |
Remove the input & output speed sensor (B) after removing the
bolts(2ea).
|
Output Speed Sensor. Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Output Speed Sensor. Installation
1.
Install in the reverse order of removal.
•
...
See also:
Front Driveshaft Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
26 Brake Control Solenoid Valve(26/B_VFS). Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Alternator Components
1. Overrunning Alternator Decoupler (OAD) pully
2. Front bracket
3. Front bearing
4. Stator
5. Rotor
6. Rear bearing
7. Rear housing
8. Regulator assembly
9. Thr ...