Kia Soul: Operation
The oil pump is powered by the engine. ATF passes through the oil filter
and gets distributed along the oil channels.
The oil becomes highly pressurized as it exits the oil pump and passes
through the line pressure valve before being fed to the clutch & brake control
valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid
valves and controls clutch and brake operations.
Description
Consists of the hydraulic system
•
Automatic transaxle fluid
•
Oil filter
•
Oil pump
•
...
Oil Pump. Component Location
1. Automatic transaxle
2. Oil pump assembly
...
See also:
Intake Air Temperature Sensor (IATS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between th ...
Using the Tire Mobility Kit
1. Detach the speed restriction label (0) from the sealant bottle (1), and place
it in a highly visible place inside the vehicle such as on the steering wheel to
remind the driver not to drive too ...
Inspection
Signal Circuit Inspection
1.
Check clutch switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
...