Kia Soul: Interior
Interior A
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior B
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior C
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior D
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Curtain airbag mounting hole (Ø6.6) |
Curtain airbag mounting hole (Ø6.6) |
Cowl crossbar mounting hole (Ø9) |
|
|
|
|
| Front door checker mounting hole (Ø13) |
Cowl side trim mounting hole (Ø8.5) |
Curtain airbag mounting hole (Ø7) |
|
|
|
|
| Seat belt height adjuster upper mounting hole (Ø15) |
Seat belt height adjuster lower mounting hole (Ø15) |
Rear door checker mounting hole (Ø13) |
|
|
|
|
| Seat belt pretensioner mounting hole (Ø14.5) |
Curtain airbag mounting hole (Ø6.6) |
Rear pillar trim mounting hole (Ø6.6) |
|
|
|
|
| Luggage side trim mounting hole (Ø8.5) |
Luggage side trim mounting hole (Ø8.5) |
Rear door striker mounting hole (Ø13) |
|
|
|
|
| Luggage side trim mounting hole (Ø8.5) |
Rear pillar trim mounting hole (Ø8.5) |
Luggage side trim mounting hole (Ø8.5) |
|
|
|
|
| Luggage side trim mounting hole (Ø8.5) |
Front seat front mounting hole (Ø11) |
Side step mounting bracket (7X12) |
|
|
|
|
| Side step mounting bracket (7X12) |
Front seat rear mounting hole (Ø11) |
Side step mounting bracket (7X12) |
|
|
|
|
| Carpet mounting hole (Ø6) |
Rear seat mounting hole (Ø13) |
Luggage side trim mounting hole (8.5X8.5) |
|
|
||
| Tail gate striker mounting hole (Ø15) |
Side Body
Side Body A
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Side Body B
* These dimensions indicated in this ...
Rear Body
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Tail gate hi ...
See also:
Cylinder Block Reassembly
1.
Install in the reverse order of disassembly.
In case the cylinder bloc ...
Owner’s responsibility
✽ NOTICE
Maintenance Service and Record Retention are the owner's responsibility.
You should retain documents that show proper maintenance has been performed
on your vehicle in accordan ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...