Kia Soul: Installation - maincat - Clutch SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Clutch System / maincat / Installation

1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening torque:
2.0 ~ 4.0 N.m (0.2 ~ 0.4 kgf.m, 1.4 ~ 2.9 lb-ft)
  
After pressing the clutch pedal operation stroke to the position (D), turn the ignition lock switch lever to ON->OFF position (E) and then tighten the bolts (B) with specified torque.
Clutch pedal operation stroke (D)
Gasoline 1.6: 145 ± 3 mm(5.7087 ± 0.1181 in.)
Gasoline 2.0: 150 ± 3 mm(5.9055 ± 0.1181 in.)
Ignition lock switch ON->OFF position (E)
Gasoline 1.6: 72.5 ± 3 mm(2.8543 ± 0.1181 in.)
Gasoline 2.0: 75.0 ± 3 mm(2.9528 ± 0.1181 in.)

    Removal
    1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the ignition lock switch connector (A). ...

    Clutch Switch
    ...

    See also:

    Distributing the sealant
    11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly distribute the sealant in the tire. Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...

    Trip A/B
    Tripmeter (1) The tripmeter is the total driving distance since the last tripmeter reset. - Distance range: 0.0 ~ 9999.9 mi. or km To reset the tripmeter, press the RESET/ button on the ste ...

    Component Location
    1. Hood switch 2. BCM & RF receiver 3. Key warning switch 4. Front door lock actuator & switch 5. Rear door lock actuator & switch 6. Tailgate ...