Kia Soul: High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back for low beams.
The high beam indicator will light when the headlight high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.
To flash the headlights, pull the lever towards you. It will return to the normal (low beam) position when released. The headlight switch does not need to be on to use this flashing feature.
WARNING - High beams
Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver's vision.
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Par ...
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). The green arrow indicators on the instrument
panel indicate which t ...
See also:
Blower OFF
Push the OFF button to turn off the blower. However you can still operate the
mode and air intake buttons as long as the ignition switch is in the position ON. ...
Component
1. Airbag module
2. Remote control upper switch
3. Remote control lower switch
4. Steering wheel assembly
5. Heated unit
6. Wiring
7. Steering wheel lower co ...
Rear Door Inside Handle Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Loosen the rear door inside handle mounting screws ( ...