Kia Soul: Fuel tank air filter Replacement
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) terminal.
|
2. |
Lift the vehicle.
|
3. |
Disconnect the canister close valve connector (A).
|
4. |
Disconnect the ventilation hose (B).
|
5. |
Remove the fuel tank air filter after removing the mounting bolts
(C).
|
6. |
Release the lever (A), and then separate the canister close valve
(B) from the fuel tank air filter (C) after rotating it in the direction
of the arrow in the figure.
Separate the canister close valve (A) from the fuel tank air filter
(B) after rotating it in the direction of the arrow in the figure.
|
7. |
Install in the reverse order of removal.
|
Fuel tank air filter Inspection
1. Visually check the fuel tank air filter(A) for cracks, leaks, loose connections, or deformation. ...Manual transaxle oil Inspection
Oil level check 1. Remove the engine room under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. ...See also:
Interior light bulb replacement
Map lamp
Room lamp
Luggage room lamp
Glove box lamp
Sunvisor lamp
1. Using a flat-blade screwdriver, gently pry the lens from the interior light
housing.
2. Remove the bulb by pullin ...
Field Effect Transistor (FATC) Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
the blower motor.
3. ...
Water Temperature Control Assembly Components
1. Water temperature assembly
2. Water temperature sensor
3. Gasket
4. Heater pipe
...