Kia Soul: Fuel Additives - Fuel requirements - IntroductionKia Soul: Fuel Additives

Kia Soul 2014-2019 PS Owner's Manual / Introduction / Fuel requirements / Fuel Additives

Kia recommends that you use good quality gasolines treated with detergent additives such as TOP TIER Detergent Gasoline, which helps prevent deposit formation in the engine. These gasolines will help the engine run cleaner and enhance performance of the Emission Control System. For more information on TOP TIER Detergent Gasoline, please go to the website (www.toptiergas. com).

For Customers who do not use TOP TIER Detergent Gasoline regularly, and have problems starting or the engine does not run smoothly, additives that you can buy separately may be added to the gasoline. If TOP TIER Detergent Gasoline is not available, one bottle of additive added to the fuel tank at 7,500 miles or every engine oil change is recommended.

Additives are available from your authorized Kia dealer along with information on how to use them. Do not mix other additives.

Operation in foreign countries If you are going to drive your vehicle in another country, be sure to:

  • Observe all regulations regarding registration and insurance.
  • Determine that acceptable fuel is available.
    Do not use methanol
    Fuels containing methanol (wood alcohol) should not be used in your vehicle. This type of fuel can reduce vehicle performance and damage components of the fuel system. ✽ NOTICE Your New V ...

    Vehicle handling instructions
    As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control, an accident or vehicle rollover. Specific design characteristics (higher ground clearanc ...

    See also:

    Flex steer
    The FLEX STEER controls steering effort based upon as driver's preference or road condition. You can select the desired steering mode by pressing the FLEX STEER button. When the steering mode b ...

    Fuel Pressure Control Valve. Description and Operation
    Description Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on ...

    Front Hub / Knuckle Inspection
    1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...