Kia Soul: Front Strut Assembly Disassembly - Front Suspension System - Suspension SystemKia Soul: Front Strut Assembly Disassembly

Kia Soul 2014-2019 PS Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Disassembly

1.
Using the special tool (09546-26000), compress the coil spring (A).

Tightening torque:
58.8 ~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6lb-ft)

2.
Remove the self-locking nut (C) from the strut assembly (B).
3.
Remove the insulator, spring seat, coil spring and dust cover from the strut assembly.
4.
Reassembly is the reverse of the disassembly.
    Front Strut Assembly Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

    Front Strut Assembly Inspection
    1. Check the strut bearing for wear and damage. 2. Check the spring upper and lower seat for damage and deterioration. 3. ...

    See also:

    Timing Chain Installation
    1. Dowel pin of crankshaft should be positioned at 3В° in relation to vertical center line. 2. Align the TDC marks (A) of the CVVT ...

    Specifications
    AVN Head Unit Item Specification Power supply DC 14.4V Negative ground Dark current Max. 0.5mA (Head unit only) (When AC ...

    Radiator Inspection
    Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. ...