Kia Soul: Evaporative Emission Control System
- Description
- Operation
- Schematic Diagram
- Components Location
- Inspection
- Canister Removal
- Canister Inspection
- Canister Installation
- On-board Refueling Vapor Recovery (ORVR) valve Removal
- On-board Refueling Vapor Recovery (ORVR) valve Installation
- Fuel Filler Cap Description
- Fuel Tank Air Filter Removal
- Fuel Tank Air Filter Installation
Positive Crankcase Ventilation (PCV) Valve Installation
1. Install in the reverse order of removal. PCV Valve: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...Description
The Evaporative Emission Control System prevents fuel vapor stored in fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel tank, the vapor passes through vent h ...See also:
Purge Control Solenoid Valve (PCSV). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between th ...
Crankshaft Position Sensor (CKPS). Description and Operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the eng ...
Thermostat Removal
Disassembly of the thermostat would have an adverse effect, causing
a lowering of cooling efficiency.
...