Kia Soul: Cylinder Head Components
Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Components
| 1. Cylinder head assembly 2. MLA 3. Retainer lock 4. Retainer 5. Valve stem seal 6. Valve spring |
7. Valve spring seat 8. OCV (Oil Control Valve) 9. Exhaust valve 10. Intake valve 11. Cylinder head gasket |
CVVT & Camshaft Installation
1.
Install the intake CVVT (A) to the intake camshaft.
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)
...
Cylinder Head Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging ...
See also:
Scheduled maintenance service
Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow the Maintenance Under Severe ...
On-board Refueling Vapor Recovery (ORVR) valve Removal
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump.
(Refer to Fuel System - "Fuel Pump&qu ...
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...