Kia Soul: Crash Pad Center Panel Replacement - Crash Pad - Body (Interior and Exterior)Kia Soul: Crash Pad Center Panel Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Center Panel Replacement

  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
2.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
3.
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing")
4.
After loosening the mounting screws, then remove the crash pad center lower panel (A) by using a screw driver.
5.
Install in the reverse order of removal.
  
•
Make sure the connector are connected in properly.
•
Replace any damaged clips.
    Crash Pad Center Panel Component Location
    1. Crash pad center lower panel ...

    Main Crash Pad Assembly Component Location
    1. Main crash pad assembly ...

    See also:

    Spark Plug Specification
    Item Specification Type SILZKR6B10E Gap 0.9 ~ 1.0 mm (0.035 ~ 0.039 in.) ...

    Blower Motor Replacement
    [Standard Type] 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash P ...

    Bluetooth® Wireless Technology(if equipped)
    Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, lnc. and any use of such marks by Kia is under license. A Bluetooth® enabled ...