Kia Soul: Brake Pedal. Inspection
| 1. |
Check the bushing for wear.
|
| 2. |
Check the brake pedal for bending or twisting.
|
| 3. |
Check the brake pedal return spring for damage.
|
Brake Pedal. Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel.
(Refer to Body - & ...
Brake Pedal. Installation
1.
Pre-tighten the bracket fixing bolt (A) in dash panel.
2.
Install the brake booster and brake pedal member fixing nuts (A)
secur ...
See also:
Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
2. Lower the hood halfway and push down to securely lock in place.
WARNING
...
Installation
1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening ...