Kia Soul: Auto stop - ISG (Idel Stop and Go) system - Driving your vehicleKia Soul: Auto stop

Kia Soul 2014-2019 PS Owner's Manual / Driving your vehicle / ISG (Idel Stop and Go) system / Auto stop

To stop the engine in idle stop mode

Stop the vehicle completely by pressing the brake pedal.

Stop the vehicle completely by pressing the brake pedal.

You must reach a speed of at least 5 mph (8 km/h) since last idle stop.

The engine will stop and the green AUTO STOP indicator (on the instrument cluster will illuminate.) on the instrument cluster will illuminate.

If your vehicle is equipped with cluster type B, a message "Auto Stop" also will

If your vehicle is equipped with cluster type B, a message "Auto Stop" also will appear on the LCD display.

If you open the engine hood in auto stop mode, the ISG system will deactivate

If you open the engine hood in auto stop mode, the ISG system will deactivate (the light on the ISG OFF button will illuminate). A message "Auto Stop Deactivated Start Manually" will appear on the LCD display. (if equipped)

Turn the engine on manually.

    ISG (Idel Stop and Go) system
    Your vehicle may be equipped with the ISG system, which reduces fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill. (For example : red light, stop sign ...

    Auto start
    To restart the engine from idle stop mode Release the brake pedal. or Move the shift gear to the R (Reverse) position or the sports mode while depressing the brake pedal. The engine will s ...

    See also:

    Anti-lock brake system (ABS)
    WARNING ABS (or ESC) will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance b ...

    Hazardous driving conditions
    When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extra distance for braking. Avoi ...

    Seat Belt Buckle Switch (BS). Installation
       Be sure to install the harness wires not to be pinched or interfered with other parts. 1. ...