Kia Soul: Adjustment
| 1. |
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
|
| 2. |
Adjust the tail gate height by turning the tail gate overslam
bumpers (B).
|
| 3. |
After loosening the tail gate striker (C) mounting bolts, adjust
the tail gate striker by moving it up or down, or right or left.
|
Tail Gate
...
Tail Gate Assembly Component Location
1. Tail gate assembly
...
See also:
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Front Wiper Motor Inspection
Speed Operation Check
1.
Disconnect the connector (A) from the wiper motor.
2.
Attach the positive (+) lead from ...
ESC Control Module. Installation
1.
Install in the reverse order of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...