Kia Soul: 120,000 miles or 96 months
❑ Inspect air conditioning compressor, air conditioner refrigerant and performance
(if equipped)
❑ Inspect cooling system *1
❑ Inspect drive belt *4 (First 60,000 miles or 72 months after every 15,000 miles
or 24 months)
❑ Inspect drive shaft and boots
❑ Inspect fuel filter *2
❑ Inspect fuel line, hoses and connection
❑ Inspect fuel tank air filter *2
❑ Inspect valve clearance (Engine 1.6) *3
❑ Inspect vapor hose and fuel filler cap
❑ Inspect visually the following items
1) Battery condition
2) Brake fluid / clutch (if equipped) fluid
3) Brake lines, hoses and connections
4) Brake pedal and operation
5) Chassis/body nuts and bolts
6) Drum brake and linings (if equipped)
7) Disc brakes and pads (if equipped)
8) Exhaust pipe and muffler
9) Front suspension ball joints
10) Fuel tank, cap, lines and hoses
11) Lubricate all locks and hinges
12) Parking brakes
13) Steering operation and linkage
14) Suspension mounting bolts
❑ Replace air cleaner filter
❑ Replace climate control air filter (if equipped)
❑ Replace engine coolant (First, 120,000 miles or 120 months after every 30,000
miles or 24 months)
❑ Replace engine oil and filter (Every 7,500 miles or 12 months)
❑ Add fuel additive *6 (Every 7,500 miles or 12 months)
❑ Rotate tires - including tire pressure and tread wear (Every 7,500 miles or 12
months)
105,000 miles or 84 months
❑ Inspect air cleaner filter ❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped) ❑ Inspect cooling system *1 ❑ Inspect dri ...135,000 miles or 108 months
❑ Inspect air cleaner filter ❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped) ❑ Inspect cooling system *1 ❑ Inspect dri ...See also:
Cluster Ionizer (FATC only) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
High beam indicator
This indicator illuminates when the headlights are on and in the high beam position
or when the turn signal lever is pulled into the Flash-to- Pass position. ...
Description
Component location : Manual transaxle
case
Operation principle : Back up lamp
switch is pushed by the reverse lug sliding when select arm, and switches the
back up lamp.
Funct ...