Kia Soul: Specifications
Item |
Specifications |
Working voltage |
DC 12V |
Operating force |
Initial position : 0.25 ± 0.15N(0.025 ± 0.015kg,
0.056 ± 0.034lb) |
Full position : 0.8 ± 0.2 N(0.08 ± 0.02 kgf,
0.579 ± 0.014 lb-ft) |
|
Working temperature |
-40°C ~ 80°C (-40°F ~ 176°F) |
Clutch Switch
...Description
- Clutch swtich is connected to clutch pedal and transmits clutch operation state to ECM. - TCM detects the clutch operation through the clutch s ...See also:
Input Speed Sensor. Specifications
▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.2 ~ 1.8) 0.0472 ~ 0.0709
Output voltage(V)
...
Rear combination light bulb replacement
(1) Tail light and side marker
(2) Rear turn signal light
(3) Back-up light
(4) Stop and tail light
(5) Tail light
(6) Tail/Stop light and side marker (LED)
1. Open the tailgate.
2. Loo ...
Yaw-rate and G Sensor. Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...