Kia Soul: Installation
1. |
Install in the reverse order of removal.
|
Removal
1. Disconnect the battery (-) cable. 2. Disconnect the ignition lock switch and clutch switch connector (A). 3 ...See also:
Side repeater light bulb Type A replacement (if equipped)
1. Remove the light assembly from the vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens parts by turning ...
Compession Pressure Inspection
If the there is lack of power, excessive oil consumption or poor
fuel economy, measure the compression pressure.
...
Wheel. Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...