Kia Soul: Drive Belt Inspection
1. |
Check belt for maintenance and abnormal wear of V-ribbed part.
Replace if necessary.
|
2. |
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
|
Cooling System Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure ...Engine oil and filter Inspection
Engine Oil Level Be sure the vehicle is on level ground. 1. Warm up and stop the engine, ...See also:
Memory Information
Displays currently used memory and total system memory.
Select [Memory Information]
OK
The currently used memory is displayed on the left side while the total system
memory is displayed ...
TPMS Receiver. Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
Piston and Connecting Rod Inspection
Connecting Rod
1.
Check the side clearance between piston and connecting rod.
Using filler gauge, measure the side clearance while moving the
connecting rod bac ...