Kia Soul: Components and Components Location
Components Location
| 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Position Sensor (TPS) [integrated into ETC Module] 6. Crankshaft Position Sensor (CKPS) 7. Camshaft Position Sensor (CMPS) [Bank 1 / Intake] 8. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] 9. Knock Sensor (KS) 10. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1] 11. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2] 12. Rail Pressure Sensor (RPS) 13. Accelerator Position Sensor (APS) 14. Fuel Tank Pressure Sensor (FTPS) 15. Fuel Level Sender (FLS) |
16. A/C Pressure Transducer (APT) 17. ETC Motor [integrated into ETC Module] 18. Injector 19. Purge Control Solenoid Valve (PCSV) 20. CVVT Oil Control Valve (OCV) [Bank 1 / Intake] 21. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust] 22. Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Control Valve (FPCV) 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] |
| 1. Engine Control Module (ECM) |
2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) |
|
|
|
| 4. Engine Coolant Temperature Sensor (ECTS) |
5. Throttle Position Sensor (TPS) [integrated into
ETC Module] 17. ETC Motor [integrated into ETC Module] |
|
|
|
| 6. Crankshaft Position Sensor (CKPS) |
7. Camshaft Position Sensor (CMPS) [Bank 1 / Intake] 8. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] |
|
|
|
| 9. Knock Sensor (KS) |
10. Heated Oxygen Sensor (HO2S) [Bank 1/Sensor
1] 11. Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] |
|
|
|
| 12. Rail Pressure Sensor (RPS) 18. Injector |
13. Accelerator Position Sensor (APS) |
|
|
|
| 14. Fuel Tank Pressure Sensor (FTPS) |
15. Fuel Level Sender (FLS) |
|
|
|
| 16. A/C Pressure Transducer (APT) |
19. Purge Control Solenoid Valve (PCSV) |
|
|
|
| 20. CVVT Oil Control Valve (OCV) [Bank 1 / Intake] |
21. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust] |
|
|
|
| 22. Variable Intake Solenoid (VIS) Valve |
23. Fuel Pressure Control Valve (FPCV) |
|
|
|
| 24. Canister Close Valve (CCV) |
25. Ignition Coil |
|
|
|
| 26. Main Relay 27. Fuel Pump Relay |
28. Data Link Connector (DLC) [16-Pin] |
|
|
|
| 29. Multi-Purpose Check Connector [20-Pin] |
|
|
|
Description and Operation
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation of On Board
Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model
year. The ...
Engine Control Module (ECM). Schematic Diagrams
ECM Terminal And Input/Output signal [M/T]
ECM Terminal Function (M/T)
Connector [C100-MA]
Pin No.
Description
Connected to
1
Inject ...
See also:
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative impact on the air conditioning system.
Therefore, if abnormal operation is ...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
2. Lower the hood halfway and push down to securely lock in place.
WARNING
...
Inspection
1.
Disconnect the ignition switch connector (B) and key warning
switch connector (A) from under the steering column.
...